ProWeld 9-Pc. Welding and Cutting Torch Kit — Model# 72B-WOR-SP

$99.99

Medium duty set includes cutting attachment, cutting tip, welding handle, mixer, 3 welding tips, tip cleaner set, striker and instructions. UL listed, Victor compatible.

Hobart Hood Auto-Darkening XTV Variable-Shade Welding Helmet — Black Flame, Model# 770450

$169.99

Variable-shade helmets feature lens darkening from 9-12 and a reaction time of 1/12, 000 of a second. Internally located controls and low battery indicator. Meets ANSI 287.1 2003 safety standards. Operates on replaceable AAA battery (included). 2-year limited warranty. Auto Darkening: Yes, Switch time (sec.): 1/12, 000, Variable Shades: 9 - 12, Base Type: AAA, Low Battery Indicator: Yes, Battery Included: Yes, ANSI Approved: Yes Internally located controls

FREE SHIPPING — Hobart TIGMATE AC/DC Stick and TIG Welding Package — 230/380 Volt, 52/39 Amp, Fingertip Control, Model# 500424

$1569.99

The TIGMATE is a complete AC/DC, TIG and Stick welding package. All you need is a bottle of argon shielding gas or your choice of Stick electrodes and youre ready to start welding. In the TIG mode, the TIGMATE offers superior performance: 18 gauge to 3/16in. steel and stainless steel; 14 gauge to 3/16in. aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8in. electrodes. U.S.A. Volts: 230/380, Amps: 52/39, Duty Cycle: TIG: 20% at 150 Amp, 15 Volts DC, Stick: 20% at 130 Amps, 25 Volts DC, Amperage Adjustments: Infinite control, Range Selection: AC low, AC high, and DC, Weldable Metals: Steel, stainless steel, aluminum, cast iron, cooper, brass, titanium, and magnesium alloys, Weld Thickness (in.): 18-gauge to 3/16 in. steel and stainless steel; 14 gauge to 3/16 in. aluminum, Electrode Size (in.): Up to 1/8, Electrode Cable Length (ft.): 15, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Dimensions L x W x H (in.): 13 x 25 1/2 x 18 Low frequency output wont interfere with electronics 150 amp TIG torch with flow-through quick-connect cord and finger tip control models Fingertip amperage control Automatically sets for TIG or stick welding AC/DC rated output at 20% duty cycle: 150 Amps at 15V AC Amp range is 20 to 165; DC Amp range is 25 to 160 Upgraded circuitry gives you finer TIG output adjustment with the remote foot or fingertip control. If you need more output while using the remote control, simply increase the setting of the front panel amperage control AC output for superior aluminum welding, DC output for mild and stainless steel Four-position polarity and range selector switch offers two AC current ranges, DC electrode (-) for TIG, and DC electrode (+) for Stick Special arc starting circuitry eliminates high-frequency starts Built-in arc assist stabilizer for AC TIG on aluminum Built-in arc assist starter for DC TIG Unique &Quot;flow-through&Quot; shielding gas TIG torch connection allows removal of torch without tools Preset automatic postflow timer protects tungsten tip, workpiece and torch Automatic high temperature shutdown Includes gas regulator, flowmeter, shielding gas hose, and instructional video 5/3/1 Industrial Warranty 5 year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes 3 year warranty on drive systems, PC boards, solenoid valves, switches and controls 1 year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days for industrial use.) Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty. Engine warranty is provided by the engine manufacturer.

Flux Welding Wire — .030

$23.99

Select flux cored steel wire to weld without using gas as a shielding agent on straight polarity MIG welders. Choose mild steel wire for auto body repair and similar types of welding applications. U.S.A. Spool Size 2 lbs.

Northern Industrial 3-Pc. Welding Clamp Set

$17.99

Clamps are drop-forged and hardened with quick-release levers. Can also be use to hold metal or wood pieces together for drilling, bolting and riveting. 8in. sheet metal clamp 9in. welding clamp 11in. C-clamp

Northern Industrial Heavy-Duty Welding Table

$169.99

Constructed of 11-gauge steel with hot-rolled steel grill top, which allows slag and debris to fall through onto a pull-out tray directly beneath the grill. Adjustable height from 30in. to 43in. Overall: 26in.L x 38in.W x 43in. Table top is 24in.L x 3in.W. Side shield sold separately.

"Astro Pneumatic 1756 5/16"" Deluxe Air Spot Weld Drill Kit with Deep Clamp, 2000 RPM, 4 CFM"

$277.99

-Air Spot Drill with 5.5 Deep Clamp Kit and 4 Drill Bits-2 Speed-Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath-Drills out the entire spot weld, eliminating the need for grinding

"TD Industrial 10161 Welding Helmet, Solar Powered Auto-Darkening, Shade #7-14"

$94.99

Filter Size 4-1/4 inch 3-1/2 inch 23/64 inch (110909mm) View Window Size 3-55/641-5/8 inch (9841mm) Working Temperature ~5~55 degree Light Shade 4 Dark Shade#7-14 Response Time 0.06ms Weight 59/64 Lb (0.42 Kg)/1 pc Working Range Suitable for any welding

Lincoln Electric Medium Duty Oxygen-Acetylene Cutting, Welding, Brazing Outfit LE KH656 Free Shipping

$220.95

Lincoln Electric Medium Duty Oxygen-Acetylene Cutting, Welding, Brazing Outfit LE KH656 A Medium Duty oxygen and acetylene gas cutting, welding and brazing outfit. Used in a wide range of applications including repairs fabrication, farm auto and home use. Cuts to 4 In., welds to 1/2 In. with optional tips. Equipped with an internal reverse flow check valve. A distortion free cutting head attachment made of solid forged brass. The inline stainless steel tube design provides increased visibility. In-Head mixer is highly resistant to flashback. Easy to read 2 In. gauges mounted on high quality regulators with easy to adjust oversized knobs.

* Medium duty oxygen and acetylene gas cutting, welding, and brazing outfit.

* Cuts 5 In.

* Welds 1/2 In.

* Used in wide range of applications including repairs, fabrication, farm, auto, and home use.

Lincoln Electric 80 gl 80a Wire Feed Welder, Welds To 1/8 LE K25011 Free Shipping

$263.95

Lincoln Electric 80 gl 80a Wire Feed Welder, Welds To 1/8 LE K25011

* Century 80GL welds 18 ga. sheet metal up to 1/8" steel. Great for general purpose metal repair and building projects.

* Two seperate heat settings and an infinite wire speed control.

* Uses .035 flux-cored welding wire on a 4" spool. No sheilding gas needed.

* Plugs into a standard 120 volt AC household outlet. No special wiring or receptacle needed.

* Safe cold wire design. Arc is not established until trigger is pulled.

* Sturdy wire feed design and multi-insulated transformer for reliable operation and long life.

* Includes installed welding gun, nozzle, tip, starter spool of wire, and operator's manual.

* 1 year parts and labor warranty on unit.

* 90 days warranty on welding gun and cable.

* Input Power: 115/1/60

* Current/Voltage/Duty Cycle: 70A/21V/20%

* Input Current @ Rated Output: 20A

* Welding Range: 35-88A

* Dimensions (H X W X D): 13" X 9" X 18"

* Net Weight: 42lbs.

Vise Grip 9r Locking Welding Clamp VIS25 Free Shipping

$23.95

Vise Grip 9r Locking Welding Clamp VIS25

* For use in welding applications or holding awkward shapes in place.

* Jaw Capacity: 2-3/4" (70 mm)

* Throat Depth: 1-5/8" (41 mm)

* Jaw Depth: 2-3/4" (70 mm)

* Size: 9" (225 mm)

Steiner 4 Foot X 6 Foot Velvet Shield Welding Blanket

$77.77

Developed from NASA technologies. Extremely fire and heat resistant - withstand temperatures to 3000 F. Softer and lighter weight than conventional material welding blankets.

Steiner General Duty Welding Gloves (Pair) - Blue

$15.88

Flame retardant full cotton lining with foam lining on palm and back of hand. Wing thumb has a patch and reinforced strap. Sewn with Kevlar thread.

Steiner Welding Curtain Roll 5Ft. x 25 Yards, Gray, Model# 63225

$189.99

Transparent vinyl curtains protect against welding sparks and UV flash. Great for maintenance welding just cut off what you need and hang it. U.S.A. Gray 5ft. x 25-yard roll Grommeted every 12in.

Vice-Grip 5-Pc. Welding Tool Set

$79.99

Two 6 3/8in. and two 11in. C-clamps adjust from 0 to 2in. or 0 to 3 3/4in. PLUS straight-jaw 10in. locking pliers. One year limited warranty.

Coxreels 1275W-3-250-C Large Capacity Welding Reel with Hose

$761.99

The Coxreels 1275W-3-250-C is a Large Capacity Welding Reel with Hose. The 1275W Series hand crank or motorized Welding hose reel is built to manage long lengths of bulky twin line welding hose. Dual brass swivel inlets on each side of the reel assure full flow trouble free performance. It features direct bevel gear drive, low profile outlet riser and open drum slot design.

Flux Core Arc Welding DVD

$24.99

Instructional DVD introduces the FCAW (Flux Core) welding process, featuring close-up welding demonstrations as seen through the welders helmet. Covers both self-shielded and gas-shielded welding wires. Focuses on welder skills, demonstrating voltage and wire speed adjustments, wire extensions, gun angle, travel speed, metal preparation and joint fit-up. An excellent video for beginner and intermediate welders. Approx. 58 min. DVDs sold individually.U.S.A.

TD Industrial 10163 Welding Helmet, Headgear 3 Adjustable, Shade #9-13

$56.99

Filter Size 4-1/4213/64(10850.85mm) View Window Size 3-3/41-1/16(9627mm) Working Temperature ~5~55 degree Light Shade 4 Dark Shade #9/10/11 Response Time 0.1ms Weight 51/64 Lb (0.36 Kg)/1 pcWorking Range Suitable for any welding

Prince Welded Tee Cylinder 2500 PSI, 3in.Bore, 20in.Stroke, 1 1/2in. Shaft, Model# PMC-8320

$189.99

Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2, 500, Bore Diameter (in.): 3, Stroke Length (in.): 20, Closed Pin Center (in.): 28, Shaft Diameter (in.): 1 1/2

H&S Welding Studs - (2.6mm), 500 Pk.

$22.95

Welding Studs - (2.6mm), 500 Pk.

Uni-Spotter Studs are universal and will improve the performance of any stud welder.

* For use with H & S-Uni-Spotter Stinger Plus Stud Welding Kit

* Heavyweight - specially designed for heavy hit areas